The complete manual for FusionBot — install, every setting, licensing, and support. Back to the product page.
Foundation Trading Systems · Retail v1 For NinjaTrader 8 · 1-minute futures charts
⚠️ IMPORTANT — READ BEFORE RUNNING BOTH BOTS
FusionBot and SwingBot can be owned and run at the same time, but run them on SEPARATE accounts.
NinjaTrader and your broker net positions per account + symbol. If both bots trade the same symbol in the same account, their trades merge into a single position: opposite signals cancel each other out, position sizes combine, and one bot's exit can flatten the other bot's trade and corrupt its trade management. Neither bot can see or protect the other's position inside a shared account.
If you run FusionBot and SwingBot together, put each one on its own account. The same rule applies to your own manual or ATM trades: never run manual trades on the same symbol and the same account that FusionBot is running on.
RISK DISCLAIMER — PLEASE READ
Futures trading involves substantial risk of loss and is not suitable for every investor. You can lose some or all of your capital, and in fast markets losses can exceed your initial deposit. Only trade with money you can afford to lose.
FusionBot is a software tool. It is provided "as is," without any warranty of any kind — express or implied — including any warranty of merchantability, fitness for a particular purpose, or profitability. Foundation Trading Systems makes no claim, representation, or promise that this software will produce profits, any particular results, or any particular performance of any kind, past or future. No example, setting, chart, or description in this manual is a performance claim or a recommendation.
Automated trading adds its own risks: software errors, data-feed errors, disconnections, broker or exchange outages, and unexpected market conditions can all cause entries, exits, stops, or targets to behave differently than intended, or not execute at all. You are responsible for monitoring any account on which this software runs.
You are solely responsible for your own testing, your own settings, and your own trades. Before using this software on any live account, test it thoroughly in simulation, on your own data, with your own settings, until you understand exactly how it behaves. Nothing in this manual is financial, investment, or trading advice. If you are unsure whether this software or futures trading is appropriate for you, consult a licensed financial professional.
By installing or using FusionBot, you accept these terms and the license agreement that accompanied your purchase.
FusionBot is a multi-strategy intraday trading tool for NinjaTrader 8. It runs on a 1-minute chart, one instance per chart, and each instance trades only its own symbol.
FusionBot is built around a simple idea: the human stays in the loop. Alongside its automated modules, it gives you on-chart manual trade buttons and a module that trades trend lines and zones you draw yourself. You decide which modules are on, how each one confirms entries, how each one is managed, and what risk each one takes. Every parameter is a user-adjustable setting — nothing about how it trades is hard-coded, and the shipped defaults are generic starting points for your own testing, not recommendations.
| Module | What it does |
|---|---|
| ORB Breakout | Trades the first 1-minute close beyond the opening range (the first Range minutes of the session). |
| WildOpen | Trades a breakout of the first few minutes of the session, optionally gated to unusually wide ("wild") opens compared with prior days. |
| Level Continuation | Trades break-and-retest continuation at key levels: opening-range edges, prior-day high/low, Asia-session high/low, and premarket high/low (each selectable). |
| Level Rejection | Fades a level after a failed break ("flip") plus a double touch at the same price — the level held twice. |
| VWAP Fade | Fades tests of the session VWAP ±1 standard-deviation bands back toward the value area. |
| Drawn Objects | Trades your hand-drawn trend lines and rectangles: line breaks, zone-edge fades, and zone break-throughs. |
| Manual buttons | On-chart LONG / SHORT / CLOSE / Move-to-BE buttons so you can take and manage your own trades with the bot's bracket and trailing logic. |
Each module can be switched on or off independently, has its own entry confirmation mode, its own management style, and its own stop and target ticks. One arbitration pass decides which module gets each entry (Section 3).
You will need:
One chart = one symbol = one instance. If you run FusionBot on four symbols, that is four charts, each with its own instance, its own settings, and its own log file.
The bot runs on your PC, inside NinjaTrader. There is no server somewhere running it for you. That means:
Brief connection drops are common, and NinjaTrader's default reaction is quick: after a short delay it treats the connection as lost, which can stop your strategy instances mid-trade. One platform setting smooths this out:
With 60 seconds, a blip shorter than a minute passes without disturbing the strategy; only a genuinely long outage triggers the connection-loss handling. This is a NinjaTrader platform setting, not a FusionBot setting — you set it once and it applies to every strategy.
One position at a time. Every module only acts while the instance is flat. The first module to enter wins; the others stand down until the trade closes.
Arbitration order. On each 1-minute bar close, the automated modules are checked in this fixed order, and the first entry wins the bar:
Drawn Objects runs after the signal modules, on its own discretionary gate — like the manual buttons, it is not bound by the signal entry cutoff (it is still bound by the no-trade window; see below).
The entry window (signal modules). Automated signal entries are only allowed:
Entry reasons. Every entry records why it fired — the level or band and the price action that triggered it. While a trade is open, the on-chart status panel shows it as a "Why:" line; after the exit it remains as "Last entry:" until the next trade, and the same reason is written to the ENTRY line in the log file (Section 13).
Orders are moved, never cancelled. When FusionBot adjusts a stop or target, NinjaTrader shows the old order as "Cancelled" and submits the replacement — that is a move, not a cancellation. Stop and target are OCO-linked: when one fills, the other is cancelled automatically.
Data modes (the Mode setting).
Every automated trade is managed in one of two styles, chosen per module in that module's settings group. The breakeven ladder and target chase both styles share live in 02 Shared Management and are chart-wide.
You can drag the bot's stop or target on the chart to a new price. FusionBot adopts your price and manages from there (you will see "MANUAL STOP adopted" / "MANUAL TARGET adopted" in the log). The bot will never loosen a stop you set — its ladder can only tighten past it — and a target you set by hand is yours: the target chase will not extend it.
FusionBot ships with "Enforce SIM account only" set to ON.
With it on, FusionBot refuses all entries on any account whose name does not contain "sim" or "demo." If the strategy finds itself on an account that fails this check, the status panel shows red BLOCKED and no trades are taken.
This is deliberate. The tool is meant to be evaluated in simulation first, where you can learn its behavior, tune its settings per symbol, and confirm it does what you expect — with no money at risk.
Turning EnforceSimOnly OFF is what allows live-account entries. That is your decision and your responsibility. Foundation Trading Systems does not recommend any particular point at which to do so. If you choose to turn it off:
There are no other hidden locks: EnforceSimOnly is a single, visible setting in 11 Mode & Safety, and what it does is exactly what is described here.
Documents\NinjaTrader 8\bin\Custom\StrategiesHouse rules for installing and updating:
A first evaluation session, start to finish:
Each module group (03–08) has an Entry confirmation setting: what must happen after the module's native signal before FusionBot actually enters. There are four modes:
For ORB, WildOpen, and VWAP Fade, Bounce is a generic judge with three knobs in the module's group: bounce proximity (how close to the level price must come, in ticks), min bars (the bounce cannot count before this many bars have passed since the signal), and max bars (give up after this many bars).
For Level Continuation, Level Rejection, and Drawn Objects, Bounce is not an add-on — it is their native machine (the retest, the flip + double-touch, and the break + retest described in Section 9), and the generic proximity/min/max knobs do not apply to them.
Shipped defaults: ORB — None · WildOpen — None · Level Continuation — Bounce (native) · Level Rejection — Bounce (native) · VWAP Fade — None · Drawn Objects — Bounce (native, break entries only; zone fades do not use confirmation).
How a pending confirmation dies: it cancels if price closes back through the level, if its wait window expires, at flatten, or the moment any other trade opens. WildOpen confirmations also expire at its entry-window end (09:45 at defaults). Note that ORB and WildOpen use up their one trade opportunity for the day when a signal arms, not only when it enters — a signal whose confirmation then fails has still used the day.
The non-default confirmation modes are there so you can choose how selective each module is. They are options to test in simulation, not improvements we claim — judge them on your own forward simulation data.
What it watches: the opening range — the high and low of the first Range minutes from the session open (default: 09:30 + 15 minutes, completing at 09:45). The edges are drawn on your chart as ORH/ORL.
Entry rule:
Management: Bracket at defaults, using ORB's own stop/target ticks; exits at the Flatten time.
Settings: master switch, entry confirmation (None at default), confirmation knobs, management style, and ORB's own stop/target ticks — all in group 03.
What it is: a breakout of the first minutes of the session (default 5 — the "OR5"), optionally taken only on wild opens: mornings when the opening range is unusually wide compared with prior days.
How it works:
The gate needs history. FusionBot builds the prior-day ranges from the bars loaded on your chart. Load 25+ days. With fewer than 10 prior days available, the gate cannot be evaluated: the day counts as not wild, no gated entries fire, and the panel shows ratio5 n/a. The log's WILDOPEN range line (written when the range completes) shows today's range, the median, the ratio, and the WILD / not-wild verdict; WILDOPEN skip is logged when a close breaks the range but the gate says no.
Window note: WildOpen is the one module exempt from the standard no-trade window — its range is complete before that window ends, so its own entry window governs it. It arbitrates first, ahead of ORB. The sim-account guard and mode caps apply to it exactly as to every other module.
Settings: master switch (ships OFF — enable it per chart if you want it), gate on/off, gate threshold, gate lookback, range minutes, entry window end, entry confirmation (None at default), management style, and target ticks — all in group 04. A separate switch in group 09 can run WildOpen at the Asia open; it ships off and is labeled in the settings as untested overnight — treat it accordingly.
What it watches — the levels (each pair selectable in group 05; all four pairs ON at defaults):
Entry rule (per level):
Management: Bracket at defaults, with Level Continuation's own stop/target ticks; flatten at the Level strategies flatten time (11:35).
Settings: master switch, the four level-pair switches, touch tolerance, setup expiry, entry confirmation (Bounce — the retest above is the bounce machine), management style, and its stop/target ticks — group 05.
What it watches: its own level set, selected in group 06. At defaults: opening range and prior day ON; Asia and premarket pairs OFF.
The flip gate comes first — no failed break, no fade. Nothing at a level can be faded until that level has produced a failed break (a "flip"):
FLIP armed, FLIP cancelled, FLIP consumed.Entry rule (per level, once a flip is armed) — the double touch:
Management: Bracket at defaults, with Level Rejection's own stop/target ticks, the shared ladder and chase; flatten 11:35. One Level Rejection trade per day — a strategy rule that applies in both data modes.
Settings: master switch, the four level-pair switches, extremes match %, entry confirmation (Bounce — the flip + double-touch above is the bounce machine), management style, and its stop/target ticks — group 06. The Level Rejection target (R multiple) setting in this group is inert, kept only so older templates load; it does not affect trades.
What it watches: session VWAP with ±1 standard-deviation bands, computed on 5-minute bars.
Entry rule:
Management: Bracket at defaults, with VWAP Fade's own stop/target ticks, the shared ladder and chase; exits at the Flatten time.
Settings: master switch, entry confirmation (None at default), confirmation knobs, management style, and its stop/target ticks — group 07. The VWAP Fade target (R multiple) setting is inert, kept for templates.
What it watches: only objects you drew by hand on the chart. Objects drawn by indicators or other scripts are ignored. A drawing on another chart only reaches FusionBot if it is attached to all charts for that instrument, or drawn on FusionBot's own chart. The panel's "Drawn:" line counts the lines and zones the instance can currently see.
Its window: entries are allowed from the end of the no-trade window to the Flatten time. Drawn Objects is exempt from the 11:30 entry cutoff — these are your discretionary setups, like the manual buttons — but the no-trade window applies to it like everything else. Setups arm and track from the open; only entries wait.
"Touch": a bar's extreme within the Drawn touch tolerance (default 8 ticks) of the line or edge.
Trend lines — break + retest:
Arming comes first. A trend line is not tradeable the moment you draw it. FusionBot first needs 3 consecutive closes on the same side of the line — that is what arms it. Only a close through an armed line counts as a break. Crosses that happen before the line has armed are ignored completely: no entry, no pending setup, nothing. If closes alternate sides — price hugging the line, or a steep line whose price sweeps across the bars — the count resets on every flip and the line may never arm. Flatter lines, with price sitting clearly on one side, arm the most reliably.
Arming is counted on live bars while the strategy is enabled. Enable FusionBot first, then draw. Bars replayed when you enable the strategy do not count toward the 3 closes, and a line drawn before enabling starts its count from the first live bar after enabling.
Rectangles (zones) — fade the edge, or trade the break:
A close inside the zone means no entries from that zone, ever.
Entry confirmation: break entries default to Bounce — the break + retest above is that machine. If you select NextOpen or NextClose for drawn breaks, that judge gets first attempt at the break while the native retest stays armed as a fallback — a confirmation choice never silently deletes a drawn setup. Zone fades do not use confirmation.
Settings: master switch; line breaks on/off; zone fades on/off; zone breaks on/off; touch tolerance; zone-fade stop buffer; entry confirmation; management style; stop/target ticks — group 08. Note that Drawn Objects' target ticks (120 at default) only apply if you switch its management style to Bracket; at the default Ride style they are unused.
Buttons (under the on-chart panel):
Manual entries use the Contracts setting for size, like every other entry.
Panel lines:
FusionBot can also run during the Asia session window (default 19:00–03:00 ET). The session ships disabled. When enabled, per-module Asia switches in group 09 choose which modules may trade overnight — at defaults, Level Continuation only; ORB, Level Rejection, VWAP Fade, Drawn Objects, and WildOpen Asia switches are all off. Asia trades use each module's own settings (for example, Level Continuation's stop/target ticks from group 05). The Asia entry cutoff controls how much of the session is tradeable: an evening time limits entries to the first hours; a morning time (e.g. 03:00) allows the whole session.
Two practical requirements: NinjaTrader must be running, connected, and the strategy enabled overnight — a closed NinjaTrader trades nothing — and overnight disconnections matter more, so review NinjaTrader's disconnect-delay setting (Tools → Options → Strategies) before relying on overnight operation.
Two optional entry blackout windows (Eastern Time). While a window is active, FusionBot takes no new entries (open trades are managed normally). The feature ships OFF; the preset windows are 08:25–08:40 and 09:55–10:05, and both windows are fully editable. There is no built-in economic calendar — the windows block clock times only, whether or not news is actually scheduled.
The strategy dialog organizes all settings into 11 groups, in this order. "Default" below is the value the product ships with, exactly as it appears in a fresh install. Defaults are generic starting points — see Section 11 before changing per-symbol values, and test every change in simulation.
| Setting | Default | What it does |
|---|---|---|
| Session open / range start (ET) | 09:30 | When the session — and the opening range — starts. |
| RTH end for zones/POC (ET) | 16:00 | End of the regular session used for prior-day levels and the zone map. |
| Range minutes | 15 | Length of the opening range (ORB, and the no-trade window). |
| Entry cutoff (ET) | 11:30 | Last time signal modules may enter. |
| Flatten time (ET) | 15:55 | When all non-level trades are closed. |
| Level strategies flatten time (ET) | 11:35 | Flatten for Level Continuation, Level Rejection, and drawn-zone fades. |
The ladder and chase every module shares. The two tick settings at the top serve only the manual buttons (and act as a fallback where a module passes no ticks of its own).
| Setting | Default | What it does |
|---|---|---|
| Risk model | FixedTicks | FixedTicks = stops/targets in ticks. RangeWidth is a legacy model kept for compatibility. |
| Manual button stop (ticks) | 40 | Stop distance for manual-button trades. |
| Manual button target (ticks) | 80 | Target distance for manual-button trades. |
| Step trail, stop-sized steps | ON | Enables the step-trail ladder (below). |
| Breakeven trigger (ticks) | 40 | Favorable excursion at which step 1 of the ladder fires. |
| Trail step (ticks) | 40 | Each further favorable move of this size advances the stop one step. |
| Breakeven plus (ticks) | 4 | Step 1 places the stop at entry + this many ticks (intended to cover fees). |
| Target chase | ON | Extends the target as price nears it (Bracket trades). |
| Chase trigger: within (ticks) | 10 | How close to the target price must come to trigger a chase. |
| Chase: extend target by (ticks) | 20 | How far the target extends on each chase. |
| Chase: stop locked under target (ticks) | 20 | On a chase, the stop locks this far behind the approached target. |
| Cap target at next zone | OFF | Shorten targets to just in front of the next SessionLevels zone. |
| Zone buffer (ticks) | 4 | How far in front of a zone a capped target sits. |
| LEGACY: Target (R multiple) | 1.5 | RangeWidth mode only; unused under FixedTicks. |
| LEGACY: Breakeven at +1R | ON | RangeWidth mode only; unused under FixedTicks. |
| Setting | Default | What it does |
|---|---|---|
| Use ORB Breakout module | ON | Master switch. |
| ORB entry confirmation | None | See Section 8. |
| Confirmation: bounce proximity (ticks) | 8 | Bounce mode only. |
| Confirmation: min bars (Bounce) | 0 | Bounce mode only. |
| Confirmation: max bars (Bounce) | 20 | Bounce mode only. |
| ORB management style | Bracket | Bracket or Ride (Section 4). |
| ORB stop (ticks) | 40 | ORB's own stop. |
| ORB target (ticks) | 120 | ORB's own target (Bracket only). |
| Setting | Default | What it does |
|---|---|---|
| Use WildOpen module | OFF | Master switch — enable per chart. |
| Gate: only trade WILD opens | ON | Off = every open trades the break. |
| Gate threshold (ratio) | 1.30 | Today's range ÷ median prior range needed to count as wild. |
| Gate lookback (days) | 20 | Prior trading days in the median; needs 10+ available — load 25+ days. |
| Range minutes | 5 | The opening range WildOpen breaks (5 = the standard OR5). |
| Entry window end (ET) | 09:45 | Last entry closes are the minute before this time. |
| WildOpen entry confirmation | None | See Section 8; a pending confirmation also expires at the window end. |
| Confirmation: bounce proximity (ticks) | 8 | Bounce mode only. |
| Confirmation: min bars (Bounce) | 0 | Bounce mode only. |
| Confirmation: max bars (Bounce) | 10 | Bounce mode only. |
| WildOpen management style | Bracket | Bracket or Ride. |
| WildOpen target (ticks) | 120 | Bracket target. There is no WildOpen stop setting — its stop is structural (the opposite OR5 edge). |
| Setting | Default | What it does |
|---|---|---|
| Use Level Continuation module | ON | Master switch. |
| Use opening range (ORH/ORL) | ON | Level pair switch. |
| Use previous day (PDH/PDL) | ON | Level pair switch. |
| Use Asia session (ASH/ASL) | ON | Level pair switch. |
| Use premarket (PMH/PML) | ON | Level pair switch. |
| Level touch tolerance (ticks) | 8 | How close a bar's extreme must come to a level to count as a touch. Shared with Level Rejection's touches. |
| Setup expiry (bars) | 20 | A pending break/touch sequence that hasn't completed within this many bars is dead. Shared by both level modules. |
| Entry confirmation | Bounce | The native break + retest (Section 8). |
| Management style | Bracket | Bracket or Ride. |
| Stop (ticks) | 40 | Level Continuation's own stop. |
| Target (ticks) | 120 | Level Continuation's own target (Bracket only). |
| Setting | Default | What it does |
|---|---|---|
| Use Level Rejection module | ON | Master switch. |
| Use opening range (ORH/ORL) | ON | Level pair switch. |
| Use previous day (PDH/PDL) | ON | Level pair switch. |
| Use Asia session (ASH/ASL) | OFF | Level pair switch. |
| Use premarket (PMH/PML) | OFF | Level pair switch. |
| Rejection extremes match (%) | 0.25 | The second touch's extreme must fall within this % of the first touch's extreme. |
| Level Rejection target (R multiple) | 2.0 | Inert — kept so templates load; does not affect trades. |
| Entry confirmation | Bounce | The native flip + double-touch (Section 8). |
| Management style | Bracket | Bracket or Ride. |
| Stop (ticks) | 40 | Level Rejection's own stop. |
| Target (ticks) | 120 | Level Rejection's own target (Bracket only). |
| Setting | Default | What it does |
|---|---|---|
| Use VWAP Fade module | ON | Master switch. |
| VWAP Fade target (R multiple) | 2.0 | Inert — kept for templates. |
| VWAP Fade stop buffer (ticks) | 4 | Buffer applied beyond the test extreme in the fade's stop placement logic. |
| Entry confirmation | None | See Section 8. |
| Confirmation: bounce proximity (ticks) | 8 | Distance judged from VWAP; Bounce mode only. |
| Confirmation: min bars (Bounce) | 0 | Bounce mode only. |
| Confirmation: max bars (Bounce) | 20 | Bounce mode only. |
| Management style | Bracket | Bracket or Ride. |
| Stop (ticks) | 40 | VWAP Fade's own stop. |
| Target (ticks) | 120 | VWAP Fade's own target (Bracket only). |
| Setting | Default | What it does |
|---|---|---|
| Use Drawn Objects module | ON | Master switch — trades your hand-drawn lines and rectangles only. |
| Drawn lines: trade trend-line breaks | ON | Line break + retest entries. |
| Drawn zones: fade edge rejections | ON | Rectangle near-edge fades. |
| Drawn zones: trade break-throughs | ON | Rectangle far-edge break + retest entries. |
| Drawn touch tolerance (ticks) | 8 | How close a bar's extreme must come to your line/edge to count as a touch. |
| Zone-fade stop buffer (ticks) | 116 | Extra ticks beyond the reference extreme applied to zone-fade stops. |
| Drawn breaks entry confirmation | Bounce | The native break + retest; fades are unaffected by this setting. |
| Drawn breaks management style | Ride | Ride at default; switch to Bracket to use the target below. |
| Drawn breaks stop (ticks) | 40 | Stop for drawn break entries (and the Ride stop). |
| Drawn breaks target (ticks) | 120 | Applies only under the Bracket style. |
| Setting | Default | What it does |
|---|---|---|
| Asia session: enable overnight trading | OFF | Master switch for the 19:00–03:00 ET window. |
| Asia session start (ET) | 19:00 | Window start. |
| Asia session end / flatten (ET) | 03:00 | Window end; Asia trades flatten here. |
| Asia entry cutoff (ET) | 03:00 | Evening time = first hours only; morning time = whole session. |
| Asia: use ORB Breakout module | OFF | Per-module Asia switch. |
| Asia: use Level Continuation | ON | Per-module Asia switch. |
| Asia: use Level Rejection module | OFF | Per-module Asia switch. |
| Asia: use VWAP Fade module | OFF | Per-module Asia switch. |
| Asia: use Drawn Objects module | OFF | Per-module Asia switch. |
| Asia: use WildOpen module | OFF | Labeled in the dialog as untested overnight — leave off unless you are deliberately evaluating it in simulation. |
| Setting | Default | What it does |
|---|---|---|
| Use news blackout windows (entries only) | OFF | Master switch. Open trades are unaffected. |
| Block 1 start / end (ET) | 08:25 / 08:40 | First blackout window. |
| Block 2 start / end (ET) | 09:55 / 10:05 | Second blackout window. |
| Setting | Default | What it does |
|---|---|---|
| Mode | SimData | SimData = uncapped data gathering. LiveRules = one trade per day per chart, and entries stop for the day at −2R (Section 3). |
| Enforce SIM account only | ON | Safety setting — see Section 5. ON = entries refused on any account whose name does not contain "sim" or "demo." |
| Contracts | 1 | Fixed position size for every entry, manual and automated. |
FusionBot ships with one generic set of defaults. During development, the settings were tuned per symbol on the developer's own charts, and the values below are the starting points that came out of that development testing for the four development symbols.
Read this label carefully: these are starting points for your own testing — not recommendations, and not performance claims. They say nothing about what results you should expect, on these symbols or any other. Instruments differ, markets change, and your data feed, costs, and risk tolerance are your own. Test in simulation, adjust per module, and only run values you have verified yourself.
MNQ needs no changes — the shipped defaults are the MNQ starting values.
| Symbol | Setting | Starting value |
|---|---|---|
| MES | ORB stop / target | 40 / 80 |
| MES | WildOpen target | 80 |
| MGC | ORB stop / target | 20 / 80 |
| MGC | Level Continuation stop / target | 20 / 80 |
| M2K | ORB stop / target | 20 / 60 |
| M2K | WildOpen target | 60 |
| M2K | Level Continuation stop / target | 20 / 60 |
| M2K | Level Rejection stop / target | 20 / 60 (only if you enable it there) |
| Symbol | Breakeven trigger | Trail step |
|---|---|---|
| MNQ | 20 | 40 |
| MES | 40 | 40 |
| MGC | 20 | 20 |
| M2K | 10 | 20 |
(Breakeven plus stays at +4 ticks on all four.)
| Symbol | Module | Gate |
|---|---|---|
| MNQ | ON | ON, threshold 1.30 |
| MES | ON | ON, threshold 1.30 — keep the gate on |
| MGC | OFF | — |
| M2K | ON | ON, threshold 1.28 |
Everything not listed for a symbol = leave at the shipped default. If you run a symbol not listed here, start from the shipped defaults and tune per module in simulation.
Every FusionBot event — entries, exits, ladder steps, chases, flattens, button actions, flip arming/cancellation, gate verdicts — is written to two places:
Documents\NinjaTrader 8, named:
FusionBotLog_<SYMBOL>_<yyyy-MM-dd>.txtThe log files never cap out and are the durable record of a session. If you contact support about something the bot did, attach the log file for that symbol and day — it contains the full sequence, including the "Why:" reason on every entry.
The day tallies in the panel ("Trades today / Day R") live in the strategy instance: re-enabling the strategy mid-day resets them. The log file is not reset.
The panel says BLOCKED and nothing trades. The sim-account guard is doing its job: the selected account's name does not contain "sim" or "demo" while Enforce SIM account only is ON. Select a sim/demo account — or, if you have deliberately decided to run a live account, see Section 5 first.
The strategy compiles with errors after installing.
Usually a duplicate file: a backup copy of a strategy file inside bin\Custom\Strategies (or Indicators) creates duplicate-type errors for everything. Keep backups outside the NinjaTrader folders and recompile. The error list in the NinjaScript Editor names the offending file.
No entries at all, all session.
Work down the list: Is the strategy Enabled and the chart live? Is the panel BLOCKED (above)? Are you inside the no-trade window (first Range minutes), past the Entry cutoff, or inside an enabled news block? Is the module you expect actually switched on in its group? In LiveRules mode, has the one-trade or −2R cap already ended the day (DONE FOR TODAY)? For WildOpen, did the gate verdict say not wild (check the log's WILDOPEN range line)?
Panel says "Drawn: 0 line(s), 0 zone(s)" but you drew objects. They are on a different chart, or not attached to all charts for this instrument. Draw on FusionBot's own chart, or set the drawing object to show on all charts for the instrument, then check the count again.
WildOpen shows ratio5 n/a.
Not enough prior days are loaded for the gate median. Increase the chart's Days to load to 25 or more and re-enable the strategy.
An order shows as "Cancelled" and you didn't touch anything. That's a stop or target being moved (NinjaTrader cancels and resubmits), the OCO sibling cancelling when the other side filled, or a flatten exit cancelling the bracket. FusionBot contains no manual cancel action.
Trades today / Day R look wrong after a restart. The tallies live in the strategy instance and reset when it is re-enabled. Use the day's log file as the record (Section 12).
A trade is open and you need out now. Use the panel's Close Trade button, or manage the position directly in NinjaTrader. If anything about the strategy's state looks wrong, disable the strategy and manage the position manually — your broker position is real regardless of what the strategy does.
Behavior differs between two charts of the same symbol. Each instance has independent settings. Compare the two instances' settings groups — especially per-module stop/target ticks and module toggles — before assuming a software issue.
FusionBot grows from the people who use it. If you have an idea for a new strategy module, a new setting, or an improvement to an existing module, submit it through the ideas page on our website (foundationtradingsystems.com).
How it works:
Submitting an idea grants Foundation Trading Systems the right to develop and sell products based on it under the terms shown on the ideas page.
Questions, problems, or a log file you want us to look at:
Email: foundationtradingsystems@gmail.com
Please include: your NinjaTrader version, the symbol and date, what you expected and what happened, and the day's log file (FusionBotLog_<SYMBOL>_<date>.txt from Documents\NinjaTrader 8). Support covers the software itself — installation, settings behavior, and defects. We cannot advise you on how to trade, what settings to use for your account, or whether any trade should have been taken.
Community discussion, announcements, and how-to material are also available through the Discord linked from our website.
FusionBot is licensed, not sold. Your license is bound to your NinjaTrader Machine ID, covers the symbol seats in your plan, and is validated by our license server. A lapsed license prevents new strategy enables; it will never interfere with a trade already open.
This software is provided "as is," without warranty of any kind. To the maximum extent permitted by law, Foundation Trading Systems and T&E Portfolio LLC accept no liability for any trading losses, lost profits, or other damages arising from the use or inability to use this software. Futures trading is risky; the responsibility for every setting, every enable, and every trade taken with this tool rests with you.
Test in simulation first. Trade only with capital you can afford to lose.
FusionBot — Foundation Trading Systems · Retail v1